Installation of Offshore Structures

            

Roc Oil Ltd
Dongara, Western Australia
Cliff Head Project Platform Installation

ICON Engineering was commissioned to install, hookup and commission the wellhead platform and topsides by Roc Oil for the Cliff Head project in Australia. The jacket and topsides were fabricated in Malaysia and transported to site on a dedicated barge. The jacket was loaded out and transported vertically.

ICON was responsible for seafastening design, naval architecture and preparation of the tow plan.

 

            

Apache Energy Ltd
Linda Field Development
Linda Platform Installation

Apache engaged ICON Engineering to undertake the installation of the Linda Platform offshore Western Australia. The 355 tonne jacket was lifted horizontally using the jackup rig Ensco 56. The jacket was upended and lowered to the seabed using ICON’s proprietary lifting sub arrangement.

The Linda Platform Installation is yet another successful project utilising a jackup rig to install the structure.

  

            

Talisman (Malaysia) Limited
BR-A Annexe
Braced Monopods 

ICON Engineering provided the conceptual design & installation engineering, followed by the structural & geotechnical detailed design for the BR-A Annexe Monopods for Talisman Malaysia. The Annexe is braced back to the existing BR-A CPP.

By using the braced suction pile monopod concept, the design and installation was simplified and the cost was significantly lower than installing an adjacent stand alone structure.

 

            

Talisman Malaysia Limited
Bunga Kekwa C Annexe Platform
Conceptual Design and Installation

ICON Engineering undertook a conceptual review and recommended an annexe monopod platform braced back to the existing BKC wellhead platform as the most cost effective solution for Talisman to add new wells on the BKC platform. The design concept was able to be installed by drilling rig or derrick barge.

 

            

Santos (Sampang) Ltd
Oyong Field Development
Tall Template Structure

ICON Engineering was contracted by Santos to provide conceptual engineering, multi-discipline detailed design and installation engineering for the Oyong wellhead platform in Indonesia.

ICON developed a Tall Template Structure (TTS) and Short Template Structure (STS) for the jacket and topsides respectively.